MFC Anhydrit 020

MFC Anhydrit 020

  • PARAMETRY:
    • Pressure strength: 20 MPa
    • Layer thickness: min. 15 mm
    • Flooring installation: at 28 days approx.
    • Mtrl.consumption: 19 kg/1 cm/1 m2
    • Packaging: 25 kg bag

MFC Anhydrit 020 is coating used for installation of poured levelled base layers of floors especially at civic, residential and industrial buildings. With 20 Mpa pressure strength.

MFC Anhydrit 020 is fresh self-levelling coating mixture bsed on calcium sulphate (anhydrite), filling, additives and water. While curing the crystal structure is being created in coating; relatively big and compact crystals connect each other thus creating minimal quantity of hollow space only Thanks to such structure the anhydrite coating reaches high strength.

Anhydrite coating is used for poured levelling (grounding) floor layers aspecially at residential, civic and indiustrial buildings with operational stress up to 7,5 kN.m-2.. At higher operational stresses is necessary to determine higher coat thickness, higher grade of strength and/or combination of both. Anhydrite coating is also very acceptable for floor heating systems – coating composition is homogenous in whole thickness with no need of further compaction (good heat conductivity), there is no need to dilate individual heating circuits. Anhydrite coating floors are installed with levelling of ± 2 mm.m-1 and they do not require other levelling screed fore installation of final surface layer. The whole range of flooring maeterial can be used, while observing the flooring installation regulations issued by flooring manufacturer.