MFC Terrazzo CP

MFC Terrazzo CP

  • PARAMETRY:
    • Laer thickness: min. 15 mm
    • Cure (suitable for grinding): 2 - 3 dny
    • Fully operational: at 7 days
    • Pressure strength: min. 40 MPa
    • Color design: grey and white cement
    • Packaging: 20 kg bag

MFC Terrazzo CP is used as a bond for production of terrazzo floors. Subsequent finish by grinding and polishing follows.

MFC Terrazzo CP is special fast drying mixture based on cement and special additives. It is ready mixed dry mixture, to be mixed with water and decorative filling at construction site.

MFC Terazzo CP is used as bonding material to manufacture terrazzo floors followed by grinding and polishing.

FOUNDATION
Foundation has to be stable, rid of loose particles and grease (jet-blasting, grinding, milling) followed by dust collection. Tensile strength of foundation  shall be 1,0 MPa min. Foundation pot holes and cracks  have to ne fixed with MFC Sanfi x 200 repair cement.


PENETRATION
MFC Primer 620 penetration is applied onto cleaned foundation, by a brush or a sprinkler with water in 1 : 5 ratio at the first layer and 1 : 3 ratio at the second layer. It is applied once or twice according to absorbence of foundation.

MIXING
Dry mixture is mixed right prior to application with potable water  to required consistency (approx 18 % of water) and while continually mixing decorative filling is added. Mixing is done outdoor in  mixing container with mixing adapter set on the drill.

APPLICATION
The final mixture shall be processed in 15–20 minutes. Apply it by equal pouring  in stripes onto required level and  strike it off with levelling rod. To ensure convergency, watch out for   new material to be applied ASAP to the earlier laid one to ensure convergency. Required foundation coating temperature as well as ambient temperature at the application is givenv in a range of +5 to +25°C.

TREATMENT
During the first stage  v of hardening it is mandatory to prevent strong air draft and extreme temperatures. The surface shall be protected from mechanical damage 48 hrs after application, it is jointless but structural and foundation expansion joints have to be made by cutting in 24 hrs.

SURFACE
Dependent  on construction conditions (usually in 2–3 days is possible to start surface grinding and polishing. When the work is over treat the surface with suitable impregnation.

ADVANTAGES of MFC Terrazzo CP 

  • thickness of layer only 15 mm 
  • easy processibility 
  • without volume changes 
  • passable after 3 hours § the surface can be grinded after 2–3 days 
  • colour design options 
  • solution variability according to the type of filler (stone, glass, metals, etc.) 
  • recommended for damp environments (e.g. garages, bathrooms, kitchens, etc.)

>REFERENCES<