At the Znojmo hospital while refurbishing the operating rooms we used MFC Level 320 material to repair and levelling the floors of 3 mm up to 5 cm thick in one working step. All requirements for floor levelling and strength for following unstallations were met.

Total area: 1000 m2

At the Dubňany High school due to the necessity of the fast refurbishment of floors during the summer holidays we used MFC Final 420 material in thickness of 4 cm with Kari net applied onto the wooden decking. The work was done in 4 days and flooring could be laid 7 days from the application of material MFC Final 420.

Multiple sport arena SAZKA ARENA Praha

Self levelling screed MFC Level 305 was used to level tribunes which were showing uneven levelling in range of 1 - 80 mm.

Due to the time limitation one working step was needed. The material without changes in volume was used.

MFC Level 305 proved excellent in such a difficult test.

Used material - MFC Level 305

Usage in total - 160 000 kg

MFC Level 320 was used while refurbishing the condominiums in Slatina. The existing pavement was grinded, penetrated with MFC Primer 620 and MFC Level 320 was applied.

Materials MFC Level 340 a MFC Level 320 were applied in 5 mm to 3 cm range in one working step while restoring castle in city of Jirny by Prague.

MFC Level 305 was used to level floor in the storage facility ranging from 5 to 15mm under the wear layer layer.

In city of Brno we levelled floor under the wear layer floor covering with MFC level 305 thus meeting the investor requirements.

In 2016 in Prague we levelled surface with MFC Level 305 for laying the flooring ranging from 5 mm to 2,5 cm at the BRIT company.

Coating MFC Final 420 was used to level base for concrete surface while refurbishing the building at the Svit facility in Zlín.

More than 40t  t of product was used MFC Final 420.

Thickness of levelling layer was in 5 - 15 mm range.

Coating MFC Level 305 was used to level the base of concrete floors at the newly constructed shopping mall in Opava.

There was used more than200 t MFC Level 305 in total.

 Thickness of levelling layer was in the range of 5 - 50 mm. 

  Advantages of MFC Level 305: levelling coating

• minimal volume changes make application of coating possible in one working step

   
• fast setting / hardening, wear layer in 3 - 4 hrs, light operation in 24 hrs.
• fast coating drying gives you possibility of early final layers
• quality surface suitable for laying the most of types wear layer flooring

Prior to move in Hervis company to the Vaňkovka shopping mall in city of Brno we used MFC Level 320 as levelling layer under the wear layer flooring.