Velké Opatovice Warehouse

Velké Opatovice Warehouse

While refurbushing warehouse in Velké Opatovice we applied MFC Final 410 with epoxide impregnation MFC Ekopox 630.

GU-WERK

GU-WERK

Due to the unsatisfactory levelling of the new floor with dry penetration surface the whole floor had been blasted and self levelling industrial coating followed MFC Final 413. Thus the investor requirement for levelling +-1mm for high lift stackers was uncoditionally met .

investor: GU-WERK, Nitra SK

Used product - MFC Final 413

Total area - 4300 m2

Bzenec Production shop

Bzenec Production shop

Self levelling industrial coating MFC Final 410 was used as a final surface treatment for ground surfaces in newly constructed production shop.

Investor had continued upon former good experience with our products in existing production shop in which was used the same material 5 years ago.

Used material - MFC Final 410 blue

Surface - 450 m2

Bratislava Underground garages

Bratislava Underground garages

Self levelling coating MFC Final 410 was used as a final surface treatment of condominium car garages High material quality and rolling load resistance guarantee surface long life span and minimum of maintenance.

Used material - MFC Final 410

Total area - 12 000 m2

Draka Kabely (Cables)

Draka Kabely (Cables)

In 1998 and 2001 our company had implemented   more than 15 000 m2 floor surfaces with MFC Final 410 the surface treatment in total at the Draka Kabely, s.r.o. in Velké Meziříčí in total.

There were new production and storage surfaces of one of the biggest manufacturer of cables of the group Draka Holding N.V.. 

I after more than 14 years of demanding operations the surface of MFC Final 410 provides problem free usage and almost non-ageing appearance. Thus proving remarkable resistance and life span of systems based on polymer-cement ssreeds.

Date of finishing: 1998, 2001

Photos made in 2015

Investor: Draka Kabely s.r.o., Velké Meziříčí

Used material: MFC Final 410

Area: 15 200 m2

Penam Nitra

Penam Nitra

At Penam bakery in Nitra was restored the industrial floor with MFC Final 410 so the requirements of the investor was fully met.

Surface area 700m2.

Zátkovy pasta

Zátkovy pasta

At the Zátkovy pasta we laid  800 m2 floor surface with the MFC Final 400 system of self levelling industrial coating. 

We carried out the refurbishment of unsatisfactory floor surface in the warehouse on the second floor.

Used compound:
- surface blasting
- repair of local potholes and cracks 
- MFC Final 420 rough base levelling
- final surface treatment with MFC Final 410 yellow

TBP Transformers

TBP Transformers

We made 1100 m2 floor surface with the system of MFC Final 410 self levelling industrial coating.

Refurbishment of floor surface in production shops, storage facilities and hallways was carried out.

Used compound:
- surface grinding
- repair of local potholes and cracks
- base penetration with MFC Primer 620 (2x)
- final surface treatment MFC Final 410 YELLOW

ALPS Trenčín

ALPS Trenčín

In the end of 2010 we laid 2500 m2 of MFC Final 410 industrial screed at the ALPS Electric, Trenčín. 

It was repair of newly laid concrete surface with dry penetration surface se vsypem whiw were damaged by rain while repair was in progress.

Used compound:
- surface ball blasting, grinding
- MFC Primer 620 (2x) base penetration 
- final surface treatment MFC Final 410 3% WHITE

INJETON PLAST

INJETON PLAST

We refurbished the floor surface of warehouse at the INJETON PLAST s.r.o. company.

There was an area of 540 m2 of store facility area clearly broken up incl. level imperfections.

Used compound:
- surface ball blasting, milling
- repair of base cracks and joints with clips (MFC Ekopox 670)
- rough base levelling MFC Final 420
- final surface treatment MFC Final 410, natural grey

KOMA system

KOMA system

We used MFC Final 400 industrial screed system to refurbish 1352 m2 of floor surface in KOMA s.r.o. company warehouse system.

There was repair of new concrete floors with dry penetration surface. Due to the insuficient adhesion the whole area separation of mentioned surface treatment happened.

Used compound:
- base milling and blasting
- cleaning and sealing of base expansion joints
- base penetration MFC Primer 620
- local levelling of base with coating MFC Final 420
- final surface treatment with industrial coating MFC Final 410
- repair of expansion joints and their sealing with permanently flexible compound

BeF Home

BeF Home

MFC Final 400 system was used to refurbish the surface of a new concrete floor with dry penetration surface

There were approx. 1200 m2 of surface floors in a new production shop of the fireplace insert manufacturer. Concrete floor with the surface treatment "dry penetration surface" had shown some imperfections ie. whole surface separation of mentioned surface treatment along with approx. 1 - 2 cm layr of concrete.

Used compound:
- base milling and blasting
- cleaning and sealing and consolidation of base joints
- base penetration MFC Primer 620
- local base levelling with coating MFC Final 420
- final surface treatment with industrial coating MFC Final 410
- repair of expansion joints and their sealing with permanently flexible compound

Tyco Electronics Czech

Tyco Electronics Czech

In the course of Christmas holidays we refurbished floor surfaces at the Tyco Electronics Czech s.r.o. company

It was a surface repair of existing concrete surfaces in the company´s expedition ward. The existing floor surface had shown failures as lifted concrete slab edges of expansion joints (up to 15 mm max.). At the same time, most likely while the repairs were in progress the concrete slab lowered itself so the upper reinforcing steel bracket was visible. The mentioned failures highly hindered the movements of forklifts which had to operate in given shop almost continuously. The total surface area was approx. 1200 m2.


As a new surface treatment was chosen MFC Final 430, our TOP product designated for heavy duty operations.

Used compound:

- base blast cleaned
- milling of uplifted slab edges
- repair of cracks and joints of base
- base penetration MFC Primer 620
- local surface levelling with levelling coating MFC Final 420
- final surface treatment with industrial coating for heavy duty opearations MFC Final 430 v dark grey color

Tatra Kopřivnice

Tatra Kopřivnice

In the end of 2015 theAAP Hranice s.r.o. company had implemented 4000 m2 floor surfaces at the TATRA Kopřivnice company.

It was a refurbishment of existing concrete surfaces that were not meeting the requirements of planned motor vehicle service and repair shop.

Used compound:
- base blast cleaning
- MFC Primer 620 base penetration
- base levelling and consolidation with MFC Final 420
- final surface treatment with industrial coating MFC Final 410, thickness of layer approx. 5 mm

KERASERVIS

KERASERVIS

Brno´s KERASERVIS s.r.o.company had chosen in their newly constructed warehouse surface treatment MFC Final 410.

With MFC Final 400 was made 512m2 floor surfaces. The outcome was the optimal surface for forklifts and vertical stacking lifts and hand pallet stackers.

Used compound:
- base blasting
- cleaning and sealing of base expansion joints
- base penetration MFC Primer 620
- final industrial screed surface treatment MFC Final 410
- base expansion joints re-cutting and sealing with permanently flexible compound

AGRALL

AGRALL

MFC Final 413 was selected as a final surface treatment in a newly constructed production shop of an exclusive importer of agriculture technology CLAAS a VÄDERSTAD

Total surface is approx.1400 m2

Used compound:
- base blasting
- base penetration MFC Primer 620
- local surface levelling with screed MFC Final 420
- final surface treatment with industrial screed MFC Final 413 rendering light grey
- cutting through the expansion joints and their sealing with permanently flexible PU compound

Outdoor sweeps were done with PMMA resin with colored sand and final coating.

LIKOV

LIKOV

Self-levelling industrial screed MFC Final 430

The second stage of refurbishing the floor surfaces at the LIKOV s.r.o. company

It is the treatment of existing floors in warehouses where the existing surfaces have been modified for high rack stackers.

After the installation of steel tracks there is implemented a surface levelling with MFC Final 430 final surface treatment. The thickness of layer is approx. 50 mm.

Used compound:

- cleaning the base by blasting
- base penetration MFC Primer 620
- surface levelling by levelling screed MFC Final 420 with 50 mm thick layer
- final surface treatment with industrial screed MFC Final 430 approx.6 mm layer for for heavy duty operation

Overall use of MFC Final 400 material was more than 12 000 kg.

REHAU

REHAU

Industrial screed MFC Final 430 was selected to do final treatment floor surfaces in newly constructed production shop of top plastic profiles.

Used compound:

- blast cleaning of of base
- base penetration MFC Primer 620
- final surface treatment with industrial screed MFC Final 430 for heavy duty operation with approx. 6 mm thick layer

Wera Werk

Wera Werk

MFC Final 410 was selected as the concrete final surface treatment in a newly constructed production shop of the top manufacturer of tightening and torque technology.

Material MFC Final 410 was aplied onto more than 4 400 m2 floor surfaces.

Used compound:
- base blasting
- base penetration MFC Primer 620
- local base levelling with screed MFC Final 420
- final surface treatment with industrial screed MFC Final 410

Šmídl Logistic center

Šmídl Logistic center

Our product MFC Cobet 115 was used in newly built Šmídl logistic center.

MFC Cobet 115 is a product intended for treatment of concrete surfaces with medium heavy operation. It contains high quality abrasive "METALIK" thus making the surface highly resistant against the wear and producing long life span.

"METALIK"
Synthetic filler produced by melting in aluminothermic metal processes of aluminum metals. It possesses very high hardness (8,4 of Mohs scale) and excellent abrasion resistance.

EUROHARD

EUROHARD

By the end of 2011 the refurbishing of 1200 m2 floor surfaces was done at the EUROHARD company

There was refurbishing of surface of existing concrete floors in two production shops for manufacturing of steel structures.

Used compound:

- base milling and blasting
- wooden expansion joints removal followed by joint filling with levelling coating MFC Final 420
- repairing of joints and cracks with compound MFC Ekopox 670
- base penetration MFC Primer 620
- local levelling and base consolidation with levelling coating MFC Final 420
- final surface treatment with industrial coating MFC Final 410

TESCO

TESCO

MFC Final 410 was selected as the most suitable surface treatment of floors in TESCO commercial network:

Tesco Kralupy nad Vltavou - 3 200 m2
Tesco Česká Třebová - 3 200 m2
Tesco Pezinok - 3 200 m2
Tesco Senica - 3 200 m2
Tesco Nové město nad Váhom - 3 200 m2
Tesco Mikulov - 1 200 m2
Tesco Mělník - 3 200 m2
Tesco Trnava - 8 400 m2

Baumax

Baumax

Baumax Kladno - 4 500 m2
Baumax Banská Bystrica - 4 800 m2
Baumax Martin - 4 500
Mega Baumax Bratislava - 11 000 m2

GLOBUS

GLOBUS

GLOBUS Baumarkt Brno - 26 039 m2
GLOBUS Chomutov - 6 000 m2
GLOBUS Olomouc - 3 500 m2
GLOBUS Opava - 5 000 m2
GLOBUS Pardubice - 5 500 m2
GLOBUS Zličín - 11 000 m2
GLOBUS Baumarkt Plzeň - 3 500 m2